Photo transfers and altered windows

Linda_Neff_mini_mug_shotI recently shared with you the altered window I was working on. Well, it’s finally finished – sort of. I still need to decide what will go into the three remaining panes but for now I’m very happy with the results.

I used Globecraft & Piccolo embossing powders on the Piccolo Accents that are used to decorate the window frame. It’s also used on some of the window frames’ edges to give it a touch of aged gold. My biggest thrill though, is the photo transfer that I finally got to work! It tool three tries but the third one turned out just as I had envisioned.

I printed a sepia-tone, color photo of my grandparents and my mother onto plain white office supply paper on my ink jet printer. I was determined to get it to work using my regular every-day supplies. I had read many articles on photo transfers and figured out that basically it’s an experiment for the most part and if you get lucky, it works. I got lucky.

My first attempt I did just by-the-book. I brushed Glastique Gloss Finishing Glaze onto a portion of  the window pane in a large enough area to fit the photo I had printed out and torn the edges off. I placed the photo face-down in to the Glastique and burnished it onto the glass and wiped up any extra Glastique before it dried. I left it overnight and spritzed it the next day to rub the paper away and it all came off. Not suppose to happen.

Globecraft_piccolo_altered_window_linda_neff_tutorial_photo_5

So I cleaned the pane, printed another photo and tried again. This time I also brushed the Glastique onto the photo as well as the glass. Placed it on the glass, burnished it and to really hold it down, I brushed Glastique over the top. Wrong. The next day when I spritzed the paper to prep it for rubbing away, the water wouldn’t soak into it. The extra coating of Glastique sealed the photo onto the glass – Duh! So, I saturate the photo, scrap it up so I can get some water under it and finally get it all scrapped off. Onto the third try.

I referred back to my book again and decided maybe I wasn’t using enough medium (Glastique) for the transfer to work. This time I printed another photo, tore the edges away, brushed a good thick layer of Glastique onto the glass and onto the face of the photo. I carefully laid it onto the coated area of the glass and used a brayer this time to burnish. I rolled over it in both directions several times, being very careful not to get Glastique on the back of the photo. When I thought it was good, I took a damp cloth and wiped away the Glastique that oozed out from using the brayer. It sat overnight once again.

Globecraft_piccolo_altered_window_linda_neff_tutorial_photo_4

The next day, I spritzed it with water and gently began to rub away the paper backing. Success! It worked just like it was supposed to. I think with photo transfers it’s just a matter of experimenting on different surfaces with different mediums. The G&P Glastique worked perfectly once I figured out how much I needed.

I also used three DIY Ornaments to create a banner to string across the window. The ornaments are connected with jump rings and Piccolo Accents that are embossed with G&P Vintage Copper Embossing Powder. I also used Vintage Copper Embossing Powder on the ornament rings and the key. I used the heat flash technique so the powder is not melted completely leaving an aged, worn look.

Globecraft_piccolo_altered_window_linda_neff_tutorial_photo_2

The completed window looks even better than I imagined it would and the photo transfer is wonderful on the window pane. I backed it with a sheet of vintage music paper to add a bit of contrast. Those are old insulator knobs a friend spotted at an antique mall for me attached to the bottom. They’ll make a great hangar or shelf to perch an old book or other memorabilia on.

Globecraft_piccolo_altered_window_linda_neff_tutorial_photo_1

I’m lovin’ playing with these DIY Ornaments. I’m always thinking of different uses for them. How about you – any ideas? Jump on over to the G&P Blog today to see the DIY Ornaments I hung from a vintage lamp shade.

Select your own G&P products to play with here:

The makeover of an old barn window

Just had to show you a project I’ve been working on lately. It’s another altered window but instead of messy embossing paste and a stencil I’m experimenting with Globecraft & Piccolo Accent pieces as adornments.

I asked for a specific flourish and some fleur-de-lies and they made them for me! I was so excited to play with them, to see how I could use them. After I punched out all my pieces I gathered my G&P Embossing Powders and adhesive and started to play.

Globecraft_piccolo_altered_window_linda_neff_photo_1

First I laid them out around the window frame to establish some sort of pattern or idea of how I might place them. Of course, all that went right out the window (no pun intended) once I began coloring the window frame and embossing the G&P Accents!

Vintage Copper and Gilded Rose Gold were used here in several alternating layers. I start by completely melting my first layer then alternately use the heat flash technique to achieve the aged, vintage look you see above. Because I wanted the pieces to look aged and worn I also applied Mars Black and Burnt Umber 3D Enamel Gels with my finger to tone down the shine. They worked great! The dark brown and black gels settle in the little nooks and crannies when rubbed on with the finger-application method.

Globecraft_piccolo_altered_window_linda_neff_photo_4

I also used the G&P Embossing Powders on an old key I had. It just wasn’t quite right so I applied Cobalt Turquoise, Burnt Umber and Mars Black 3D Enamels Gels with the fingers to achieve the look you see below. I think it turned out really great. Love all the little doses of turquoise I see in there.

Globecraft_piccolo_altered_window_linda_neff_photo_2

I also wanted to see how the Gilded Rose Gold embossing powder would look on the edges of the window frame to I dabbed on the Embossing Powder Adhesive and lightly sprinkled with the powder and heat set. Wow! It looked just like an old rusty edge. I liked it so well I added it sparingly around the entire window frame.

Globecraft_piccolo_altered_window_linda_neff_photo_3

Once the frame color was where I wanted it I began to add the G&P Accents pieces I had embossed and distressed earlier. Once the pieces were glued in place I added a thick coat of Glastique Gloss to seal and protect them. The Glastique speeds up the patina-look of the metallic embossing powders and really adds a special punch to the pieces.

Globecraft_piccolo_altered_window_linda_neff_photo_5

The window is not quite finished. I just haven’t been able to ‘see’ where it wants to go. But as soon as I do, you all will be the first to see!

Globecraft_and_Piccolo_Linda_Neff_DIY_Ornament_5Art_Glitter_Linda_Neff_Faux_Lace_bag4

It’s been a busy week and I have several project posts out there today in addition to the window, so hop on over to the Globecraft & Piccolo Blog to take a look at another ornament I worked on recently then swing by Art Glitter to see how I used those cute little heart-shaped ornaments as gift tags on gift bags that I decorated with Art Glitter!

Making a holiday fashion statement …

I love Christmas decorating. It’s killing me that my tree isn’t up yet and my decorations are still in tubs! Hopefully we’ll remedy that later this week.

I’ve been working with these ornaments from Globecraft & Piccolo (G&P) a lot lately and just having so much fun with them. The ornaments are really cute and come with holiday figures in them, but as you can see I opted to use G&P’s DIY Ornament (which is blank inside) and a fairy from Crafty Secrets Altered Fairy 09 cut-out sheet.

I ran the rings through my Vagabond in an embossing folder to add some texture then painted the top and bottom rings of the ornament with Pearl Adirondack Paint Dabber. When the paint was dry I brushed on some G&P’s Glastique Gloss Finishing Glaze. Glastique in a clear-drying dimensional adhesive so have a multitude of uses! While the Glastique is wet I sprinkled on G&P’s Pure Sparkle Glitter to add a bit of shimmer to the ornament.

After all that dried, I put a heavy coat of Glastique Gloss Finishing Glaze on and let it sit to dry. A coat this thick will usually need to cure overnight so I set it aside and worked on the inside of my ornament.

I used the Glastique again by painting it on the inside of the back bubble. This acts as my adhesive to hold my Krystallos Vintage Glass Glitter in place. I just sprinkled on the glitter and tapped out the excess. The glitter in the back of the bubble allows the light to show through but still gives your interior a background. The cute little Fairy is fussy-cut from the Crafty Secret sheet and all decked out for the holiday in more glitter! She’s wearing Art Glitter Ruby Red 500 Microfine Opaque and Cavalado 109 Ultrafine Opaque. The little word phrase is printed on white cardstock, but out and trimmed in a fine line of glitter.

I use dried moss behind my characters to lend them support and give them dimension. It’s all glued in place and left to dry before sealing in the bubble frame.

The next day the thick layer of Glastique on the outer rings should be dry and assembly takes place. I simply layer all the pieces, following assembly directions for the ornament, and glue it all in place with Glastique. I clamp it together with wooden clip clothespins because they are gentler than binder clips and will not leave indents in my Glastique finish. Usually it only take 15-20 minutes for the frame to set up nicely.

I finished this ornament off by piercing a hole in the bottom, inserting a jump ring and adding a clear bead with mini gold jingle bell. I used a thin wire to make a beaded hook at the top for hanging and added a pretty bow.

I’m in love with these ornaments. They make such a lovely gift and can be filled with a variety of clip art to be used year-round! I like to hang them from lamps and drawer pulls. Some day I hope to have a vintage ornament tree of ancestors!

I’ve been busy making Christmas decorations and gifts. Take a look over on the Globecraft & Piccolo blog today to see how I made these terracotta pot Christmas candle holders!