Through the years

On September 7th, Green Door Studio will have officially been open for 3 years. We started out on this crazy adventure after I was laid off from my job. I had always dreamed of having my own business, and my mom was out of her mind enough to be a willing participant. Since then, I have gotten married, moved around, had other jobs, quit working, and became more involved again in the business. Mom has been the consistent face of the business, and has worked her butt off to make it what it is today.

13124923_1804066296489253_5291174545683483020_n

Mom and me on opening day, September 7, 2013.

We went from having a fairly empty shop:

to having a very crowded shop:

13603810_1831199770442572_4184652574315776670_o

in a brand new location:

This journey has been a whole lot of hard work, but luckily we’ve had wonderful friends and family helping us along the way, from one location to the next. The most amazing of all is my dad, who helps us with pretty much everything.

12108228_1726946504201233_8137224605762879284_n

(I’m a little surprised he hasn’t disowned us yet.)

While we do paint furniture in our own styles:

13621481_10206279851462613_627259448_o

we also do custom paint jobs with either your furniture or our unfinished furniture:

13769595_1835852859977263_1214172244278942297_n

and large variety artsy classes, which are always a great time:

and we have a great selection of home decor and accessories:

13653110_1831199750442574_2389472599379865765_o

We have also recently become a stockist for Pixie Dust Paint Company, carrying the company’s full line of mineral paint additives and all-natural, vegan-friendly finishing waxes.

14022167_1847386108823938_4311045727749300516_n

Our three-year celebration begins Wednesday, August 31st and ends Saturday, September 3rd. On Saturday, come enjoy light refreshments, creating a fall-themed tag, and discounts including 10% off purchases $50 or more or 15% off purchases of $150 or more. (Sale excludes custom-paint quotes, classes, and previous purchases.) Discounts are valid Wednesday-Saturday. We will be spilling out into the parking lot, weather permitting, with every piece – finished or unfinished – that we currently have at the shop, in storage, and at our houses.

Candy Scraps will also be a vendor on Saturday, so come check out her garden-themed pieces and more.

Green Door Studio is located at 6105 Grand River Ave, Brighton, MI 48114. Our phone number is (517)-618-7700. Hours: 10 a.m. to 5 p.m. Wednesday through Friday; 10 a.m. to 3 p.m. Saturday.

 

Just a note…

20141126_151719Thanks for stopping by on this wonderful Thanksgiving day! This is my last post as guest designer for Dreamweaver Stencils this month. I enjoyed my stint this month and had so much fun playing with Dreamweaver Stencils.

The Dream Team challenge you to be especially “Thankful and Thoughtful” during this month. Link your creations with this theme in mind on the Dream It Up! blog using the Inlinkz tool and you could win the stencil of your choice. A bonus stencil of our choosing could be yours for using Dreamweaver product(s) in your artwork.
Today I want to share a technique to make another art journal background, but this time we’re going to cut it up and make mini notebooks from it that will fit in your purse or pocket! How cool is that – and just in time for gifting.
I started with Dreamweaver embossing paste, this beautiful Zen Flower Stencil and watercolor paper.
linda_neff_dreamweaver_stencils_notebook
After my paste dried I colorized the background with Ranger’s Distress Inks, dried and continued to dip and spray until the color was just as I wanted. I added more color by rubbing in some Adirondack Dye Ink using another Dreamweaver Stencil, Tapestry, that is a big favorite of mine.
20141126_143124
After the Tapestry Stencil I used some Aqua ink and rubbed it through Dreamweaver Stencil, Vintage Decor (click here to see how I used this stencil to turn an old drawer into beautiful home decor storage).
20141126_143520
I added some images and text with rubber stamps then more color sprays and blotting to get this final look. This turned into a beautiful art journal page but I’m still cutting it up!
20141126_143950
The art journal page is used to cover salvaged chipboard. I connected the two by running the journal paper through my Xyron 5″ Creative Station, stuck it to the chipboard and used another journal section to cover the inside and the back cover as well.
20141126_150612
Once the covers were covered I punched the binding holes with my Zutter. The inside pages were cut about 1/8″ smaller than the cover on both sides and bottom.
20141126_151148
The covers are so pretty – I really enjoyed this project. I gave no thought as to how they were cut, I just cut them to a size I wanted to use. Once bound they make a perfect little stocking stuffer, thank you gift or something pretty to keep for yourself!
20141126_151706          20141126_151747
By the way, the Dream Team are very THANKFUL when our followers are THOUGHTFUL enough to leave us a nice comment on our posts! Here’s the “A” team lineup for this week.
Link your own project using this link:  An InLinkz Link-up

Cherish life’s glittery moments …

Linda_Neff_mini_mug_shot

I know you may be tiring of all my DIY ornaments but please suffer through one more with me. I just can’t seem to get enough of them lately and when I finish one – or sometimes while working on one – thoughts of how I will decorate the next one are already running through my mind. They’re so easy to play with and you can fit them to any theme or event.

This one is actually reversible! The heart can be seen from either side so it can hang anywhere it may spin or be viewed from both sides. And, yes, that’s the Sizzix Primitive Heart once again as well. What can I say …

So here’s the steps to how I created this precious little hanging.

globecraft_Piccolo_DIY_Ornaments_wings_linda_neff_photo1

I cut two of the hearts from corrugated cardboard, ran them through my Xyron 1.5″ Create-a-Sticker. I left the hearts on the Xyron backing and spritzed them with water and roughed them up a bit before painting them with G&P Pink Rose 3D Enamel Gel. While the Gel is still wet I sprinkled them with Art Glitter Mimosa #102 Ultrafine Transparent. I love the way this glitter glistens as the globe turns and moves – it sparkles in different colors. Really cool.

globecraft_Piccolo_DIY_Ornaments_wings_linda_neff_photo2

The rims of the ornament are also painted with the Piccolo 3D Enamel Gel and the outer rims sprinkled with the same Mimosa glitter. I coated the fairy wings with a clear layer of Glastique so the natural color of the bookboard shines through. Once all the pieces are dry the assembly begins.

globecraft_Piccolo_DIY_Ornaments_wings_linda_neff_photo3

I laid a strand of wire on the backside of one of the hearts and used Designer Dries Clear to adhere the wings to the same backside. The same Designer Dries Clear is used to adhere the hearts back-to-back. The printed, cut out and inked words and gems are also adhere with the Designer Dries Clear.

globecraft_Piccolo_DIY_Ornaments_wings_linda_neff_photo4

I assembled the Globecraft DIY Ornament following the directions that came with it. Before adhering the top globe and rim to the bottom, the wired hearts are laid across the center of the globe. Designer Dries Clear is used to adhere the top half to the bottom half and I use clip clothespins to hold it together till the glue sets. One side of the heart says ‘wish’ and ‘dream,’ the other side says ‘cherish’ and ‘love.’ When the light catches this it just sparkles and makes me smile.

globecraft_Piccolo_DIY_Ornaments_wings_linda_neff_photo5

Visit the Art Glitter blog to see another project I created recently with their glittery products!

Celebrate every day

Linda_Neff_mini_mug_shot
Linda Neff

I think you know how much I enjoy making these little DIY Ornaments. I made several that traveled out to California for CHA and then back home to Michigan. I picked them up last week so was finally able to take some photos of them so I can share them with you all.

You’ll find a tutorial over on the G&P Blog today and I’m gonna give you a quick run-down here as well. On the G&P Blog I show you how I made one using clip art inside and this one here shows how I used some of my vintage button stash. They’re both very different.

For this one, titled ‘Celebrate every day,’ I wanted to leave the bookboard rings their natural color. I did, however, place them in an embossing folder and run them through my Vagabond. I did this for both outer rings. It’s not necessary for the inner ring because only the very edge shows.

I then squeezed on a good amount of Glastique Gloss on both outer rings and both sides of the inner ring and spread it around to give the bookboard rings some shine. It also acts as a sealant and really makes the embossing noticeable.

globecraft_Piccolo_DIY_Ornaments_buttons_linda_neff_photo_5
DIY Ornament: outer rings embossed and treated with Glastique Gloss.

I cut and rolled several paper flowers with the Sizzix Flowers, 3D die. I had some leaves and a vine leftover from some project so decided to use them all together. I used a small paint brush to apply Glastique to the leaves and flower edges an sprinkled them all with a light dusting of Fawn Microfine Transparent glitter. I set those aside while I figured out what else was going in this globe.

I opted to finger paint some Rose Pink 3D Enamel Gel onto the inside of the back globe. This provides a bit of dimension and texture and is still transparent while making the finished piece look good from the back. When that dried I adhered vintage buttons in a single layer to fill the back globe. Now I could start assembly. I laid the vine, leaves and flowers in until I got an arrangement that appealed to me then I glued them all in place, added the computer printed phrase and let it sit a while to set up.

DIY Ornament: back globe with vintage buttons and 3D paper flowers.
DIY Ornament: back globe with vintage buttons and 3D paper flowers.

When it was pretty stable I added a thin line of Glastique to the unfinished side of the bottom ring and set the globe into it, clipping it together with clothespins while the glue sets up. When it’s pretty much set, run a thin line of Glastique around the lip of the globe and lay the inner ring on it; clip to set up.

DIY Ornament: inner ring glued to top portion of bottom globe.
DIY Ornament: inner ring glued to top portion of bottom globe.

The Glastique dries clear so no need to fret over a little bit oozing out. Now glue the top globe to the inner ring then glue the top embossed ring over that and clip till the glue sets. I like to leave these for a couple hours or overnight just so I’m sure all my glue is perfectly dry before messing with it.

DIY Ornament with all layers together; clipped to hold tightly until glue is set.
DIY Ornament with all layers together; clipped to hold tightly until glue is set.
DIY Ornament with Glastique finish.
DIY Ornament with Glastique finish.

This one went together quite quickly and I added a Tim Holtz Swivel Clasp to the top for hanging. There’s another ornament over on the G&P Blog today from me. If you’d like to try this on your own you can order your DIY Ornaments by clicking the link below. I’ll also have a class or two coming up at Scrapbook Peddler with the DIY Ornaments so watch for that date to be added to the calendar soon. I’ll be at the Scrapbook Peddler next weekend for a Piccolo Card Class.

Lovin’ this little box …

Linda_Neff_mini_mug_shotI love looking at blogs where the artist creates adorable little gift boxes. I think gift boxes are such a lovely and fun way to present a gift to someone – in addition to the gift inside they also get to enjoy or reuse the box it came in!

I’ve never really tried to make too many boxes. I always thought it would be a bit time-consuming. Boy, was I wrong!

I made this little box in under two hours – I think it was more like an hour and a half from start-to-finish.

Linda_Neff_Xyron_Art_Glitter_Valentine_box_photo

I got the idea this morning when I was putting a new bar of soap in my shower. Yardley soap is one of my favorites, I especially love their English Lavender, and when I was flattening the box for the recycle bin it occurred to me that the box is the perfect size for a little gift of candy or a gift card – or both! So instead of adding it to the recycle bin I headed for my room and carefully opened the box on its side seam so I could use it for a template.

Art_Glitter_Linda_Neff_Love_Glittery_Box_Photo_1

I used a paper from my Ciao Bella Stack from DCWV and traced the soap box onto the backside of the paper (it’s easier to see the pencil lines on the white rather than the pattern paper). Cut the box by cutting on the inside of the pencil line so no pencil lines will remain that might be seen. Use a scoreboard to score lines on your paper in the same places the box has score lines. A bone folder will give you a nice smooth crease.

Art_Glitter_Linda_Neff_Love_Glittery_Box_Photo_2

I used the cut-out sheet and a coordinating paper from the same pack of Ciao Bella Stack from DCWV. I selected my title for the box and carefully fussy-cut that out, then cut about a two-inch strip of the coordinating paper to use as a wrap on the box. The Fiskars Lacy Doubles Interchangeable Border Punch was perfect to punch the edges on the wrap strip. All the edges – box, title and punched strip – are inked lightly with Vintage Photo Distress Ink.

Art_Glitter_Linda_Neff_Love_Glittery_Box_Photo_3

I added a strip of Sticky Strips to the outer edges on the punched border strip. These will easily hold Poupon 717 Microfine Transparent Glitter and help to add a bit of glitz to the wrap.

Art_Glitter_Linda_Neff_Love_Glittery_Box_Photo_5

I used my ‘glitter painting’ technique on the title by squeezing out a dollop of Designer Dries Clear (DDC) onto a palette. I take a fine-tip brush and carefully ‘paint’ the DDC onto parts of the rose on the title cut-out then sprinkle with the appropriated glitter color. I used Juicy Fruit 99 and Just Peachy 162 Ultrafine Transparent glitters along with Poupon 717 Microfine Transparent glitter on the rose to create a variegated look. The leaves are done the same way using Leaf 114 Opaque along with three additional greens from a medallion of glitters. The rim of the ‘Love’ title is ‘painted’ with Tree Bark 524 Microfine Opaque.

Art_Glitter_Linda_Neff_Love_Glittery_Box_Photo_4

I love the look from adding glitter to die-cuts or stickers for that matter. It really helps dress up a plain-Jane and adds a nice touch of glitz to what, otherwise, might be flat and dull.

While the glittered pieces are setting aside and drying, it’s time to add the glitter to your Sticky Strips. This is so easy! Peel the protective cover from the strip and pour on the Poupon glitter. I always gently rub the glitter into the Sticky Strip before tapping the excess off.

Fold the box and add adhesive to the side to adhere together. I used the Xyron Mega Runner with permanent adhesive. Only the side seam needs to be adhered but I also added adhesive to the bottom flap so it will not open. Fold the box closed then wrap the wrap band around it to see where to crease the band. Remove and score so the band will wrap and lay nicely; secure to box with ends meeting in front (the title is adhered over the ends). I wanted my title to be domed so added three strips of adhesive foam tape to the center areas then used DDC to adhere the title to the box (this creates the dome).

Linda_Neff_Xyron_Art_Glitter_Valentine_box_photo

Fill with some Valentine candies for a cute little gift.

I also decorated some recycled jars for Valentine’s Day gift-giving. Visit the Art Glitter Blog for the tutorial.

A simple ‘Thank You’ is all it takes …

Linda_Neff_mini_mug_shotHave you ever received that little gift during the holidays from a friend or co-worker you weren’t expecting it from? It seems to happen periodically and it can catch us off-guard and unprepared. Years ago I would feel very awkward about accepting it and not giving a gift in return, but as I grow older, I’ve learned over time to graciously accept the gift in the spirit in which it is given, smile and say ‘thank you.’

I do, however, like to acknowledge the receipt of the gift and so I have taken to making holiday-themed ‘Thank You’ and note cards. These are quickly made with leftover papers and embellishments from your Christmas cards, tags and wrappings. You can simply send the pretty hand-made thank you card to the gift-giver or even better, give them a set of note cards in a pretty little gift bag for them to use!

This is a set of four Christmas-themed cards I made using leftover papers from Authentique’s Festive line, my Xyron Mega Runner with permanent adhesive, bookboard accents from Globecraft & Piccolo and some pretty twine from The Twinery.

Xyron_Globecraft_Piccolo_Cards_Linda_Neff_photo_2

As you can see, these are your basic A2 card (4 1/4 inches-by-5 1/2 inches). I basically used coordinating scraps, cut and inked them and stuck it all down on a plain white card made from 110 lb. white cover stock from Staples. I added some borders punched with a Fiskars Border Punch, popped some of the elements up with dimensional foam tape and added a few embellishments.

The Globecraft & Piccolo (G&P) bookboard pieces are left natural and coated lightly with G&P Glastique Gloss to give it that beautiful shiny finish. I love these because they’re thinner than most chipboard elements on the market and will easily go through the mail.

Christmas_Cards_Xyron_Linda_Neff_photo_3

I like to present them in a hand-made gift bag. The bag is made from a 6-inch by 12-inch strip of cardstock and then just add pretty papers to the front, back and sides. Tie a pretty ribbon for a handle or braid some colored twine from The Twinery. All the papers, including the gift bag, are stuck down with the Xyron Mega Runner using permanent adhesive.

Globecraft_Piccolo_Handmade_Holiday_Blog_Hop_Cards_Linda_Neff_Photo_2

These make perfect gifts any time of the year. They’re easy enough to make that you could keep several extras on-hand for that last-minute gift for co-workers, teachers, etc. January is also a great time to take the time to sit down and make your Christmas cards for 2013!

Christmas_Cards_Xyron_Linda_Neff_Photo_1_edited-1

Terracotta pots decked out in silvery bliss…

This is one of four pots I recently worked on for my Art Glitter blog post today. I was inspired by a photo I seen on Pinterest recently – four little pots in a wired carry tote. I already had an old tote I just kept hanging on to – just in case. I purchased four little terracotta pots that fit in the tote and then ventured outdoors to collect the other necessities. This was a relatively inexpensive holiday decor item and a whole lot of glittery fun to make! I used Tombow pens for the tag, which is made from a Fiskars punch and lots of Art Glitter to decorate the pots.

Jump on over to the Art Glitter blog to see how you can make one for yourself! It would be fun to make several of these to present to guests when they come calling!

Hope your turkey day has been a good one!